|
LeveleseTM Continuous Water Well Level Sensor, the simple, price, value and accuracy leader for well water level sensing and display, is an ideal soltution for aquifer level recording and underground pollution plume tracking.
Specified, patented and designed by engineers with half a century’s individual experience in level
instrumentation, Levelese has been designed to operate in the most stringent environments ranging
from marine oil storage, acidic material transportation vessels to pure well water. Levelese© is not affected by turbulence and the actual depth of the well.
Levelese continuous level monitors are:
- Easy to install and maintain
- Highly reliable
- Without moving parts
- Possess wide rageablitly from 0.5 ft to more than 100 ft
- Demonstrate negligible sensing errors
- Excellent with foam or turbulent applications
- Independent of specific gravity
Using the principle of buoyancy the Levelese level measuring system weighs an inert chain, secured below the fluid surface and determines the inverse of liquid level and converts it to an analog or digital electronic signal for indication, alarming or continuous or on-demand transmission.
(For more information, click here.)
|
Contact us
Telephone: 303-586-1890
Email: info@levelese.com
|
|
Applications:
- Aquifer Level
- Underground pollution plume recording and tracking
- Available Well Capacity
- Pollution plume tracking
- Well pump control
- Well Monitoring
Specifications:
- Level ranges: 0-6 inches to 0-166 ft
- (Absolute depth of fluid does not affect the measured range)
- Minimum well casing ID: 2 In. Body Diameter 1.5 In.
- Cable: #26, 2-twisted pairs, shielded in PVC jacket. (longer cable lengths possible with differing wire size)
- Maximum cable length: 5,000 Ft. (2500 Ft well depth)
- Display resistance=100 ohms, internal 24 VDC transmitter excitation, 295 ohm additional loop capacity
- Materials of construction:
- Low copper aluminum, stainless steel, HDPE
- Other materials based on application
- Mounting: Supported by cable, well Casing cover with cable securing-strain relief
-
- Functional Specifications:
- Smart 2-wire 4-20 + HART® Setting Remote Zero & Span
- Better that 1000:1 turndown & 1000% Zero Suppression & Elevation
- Auto Zero, Ambient Temperature Compensateion and On-board Diagnostics
- On-Board Alarms with Progammable Upscale & Downscale
- Accuracy: Better than ±0.15% FS (cumulative)
- Linearity: Better than 0.98% FS
- Hysteresis: Better than 0.03% FS
- Operating Temperature range: 0 to +65 Deg C
- Response time for 67% final value to step level change: <250 mS
- Power required: (varies by application)
- 117 VAC, 24 VDC w/Display
- 10-24 Vdc @22 mA
- Rechargeable Batteries
- Solar
- Output, Display, Receiver:
- 4-20 mA, 292 ohms
- Additional Load Resistance with 5,000’ cable
- Bargraph w/4 Digit Display, alarm contacts
- Accessories:
- Cable Drum-Windless
- Well Installation Kit
-
Need more information?
Download brochure & spec sheet
| |
|